Purpose:
High- performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces . Produces a uniform surface texture , and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 6 nozzle (3/8-inch orifice).Requirements for Operation:
These items are required but not included with this equipment. - Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle . See Air Consumption Chart in Blast Off 2 booklet.
- Maximum working pressure 150 psi
- Minimum pressure 30 psi needed to operate OSHA- required remote control valves
- NIOSH-approved supplied-air respirator
- Grade D breathing- air supply as defined by the Compressed Gas Association Commodity Specification: G-7.1
- Abrasive blast media - consult abrasive supplier for appropriate media for your application
- Blast suit and work boots
Description of Operation:
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting, releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.Note:
For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment.
|
