Precision Finishing Inc.
Precision Finishing Inc.
708 Lawn Avenue
Sellersville, PA 18960
Phone: 1-800-523-6232
Email: info@precisionfinishinginc.com
Print Back
4 Cu Ft Contractor Blast Machine
Field portable, high-production, single chamber blast machine, rated at 150 psi, (for one operator). Holds 4 cubic feet of blast media. Equipped with Millennium pneumatic remote controls and Quantum manual metering valve.
Unit of Measure

Specifications

Color

 N/A Champagne

Packaging

 N/A Secured on skid and shrink wrapped

Pressure

 N/A 150 psi

Part

 N/A Contractor blast machine

Height (Floor to Highest Point)

 N/A 49 in

Height (Floor to Highest Point)-Including Skid

 N/A 54 in

Width (Outside Hub to Hub)

 N/A 29 in

Width (Outside Hub to Hub)-Including Skid

 N/A 35 in

Length (Hose Coupling to Handle)

 N/A 47 3/4 in

Length (Hose Coupling to Handle)-Including Skid

 N/A 48 in

Machine Diameter

 N/A 20 in

Net Weight

 N/A 382 lbs

Shipping Volume

 N/A 52.5 ft³

Shipping Weight

 N/A 454 lbs

Floor To Center of Inlet Pipe

 N/A 27 3/8 in

Floor To Center of Hose Coupling

 N/A 3 5/8 in

Outside Handles Width

 N/A 20 1/8 in

Details

N/A

    Purpose:
    High- performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces . Produces a uniform surface texture , and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 4 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 5 nozzle (5/16-inch orifice).

    Requirements for Operation:
    These items are required but not included with this equipment.

    • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle . See Air Consumption Chart in Blast Off 2 booklet.
    • Maximum working pressure 150 psi
    • Minimum pressure 30 psi needed to operate OSHA- required remote control valves
    • NIOSH-approved supplied-air respirator
    • Grade D breathing- air supply as defined by the Compressed Gas Association Commodity Specification: G-7.1
    • Abrasive blast media - consult abrasive supplier for appropriate media for your application
    • Blast suit and work boots
    Description of Operation:
    The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting, releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

    Note:
    For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment.

Advantages

N/A

  • Rated for 1 50-psi maximum working pressure
  • 1 1/2-inch Millennium valve provides unrestricted air flow
  • Quantum metering valve maintains smooth , consistent flow, adjustment knob allows precise control of media flow
  • 1 1/4-inch piping allows up to 50 percent increase in air flow; when compared to 1-inch piping
  • 29-inch width fits through standard doorways
  • Four-wheel integral cart for ease of moving
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls
  • Weather-resistant storage area holds manuals, paperwork and small parts

Approvals and Certifications

N/A Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) code for 150-psi working pressure . Vessel is hydrostatically tested and National Board certified.
Remote control system complies with OSHA regulation 1910.244 (b).