Precision Finishing Inc.
Precision Finishing Inc.
708 Lawn Avenue
Sellersville, PA 18960
Phone: 1-800-523-6232
Email: info@precisionfinishinginc.com
Print Back
Reduce Operating Costs & Improve Finishes

Using "economical" blast media, such as slag, for industrial blasting can be very costly indeed. Because these low-cost abrasives break down so quickly, reusing them is impractical. As a result, you're constantly paying for replacement media, disposal of spent media, and manhours to move this material around - all of which can put a big drain on your profits.

With Empire's pneumatic Blast & Recovery System (PRS), you can tap the cost-saving advantages of more durable media for only a modest investment. Empire's PRS lets you move up to recyclable media, such as aluminum oxide, chilled iron and steel grit, which can be used effectively over and over - from 6 to 200 times. The result is usually a very attractive return on investment in media savings alone.

Reusable media are also faster acting and less dusty, meaning you get the additional advantages of increased productivity and a cleaner working environment. With the PRS, you can move blasting operations into enclosures to comply with increasingly stringent environmental regulations. And, because the PRS recycles good media while removing dust and fines, blasting results are more consistent.

Simple blast controls and convenient media-loading procedures make Empire’s PRS very easy to operate. A built-in access ladder and viewing window in the system’s storage hopper are just two examples of the PRS’s many friendly features. And, with heavy-duty duct, an Ultrawear-lined reclaimer, and a silicone carbide nozzle, you know the system is designed to last.

Skid chassis is standard.
All models available with optional dolly chassis for mobility.
Unit of Measure

Specifications

Model Number

 N/A PRS-6

Blast System

 N/A Mounts to 650 pot

Features

PRS Blast & Recovery System Features

 N/A
PRS Blast and Recovery Features

PRS Blast & Recovery Systems Options

PRS Blast & Recovery Systems Options

 N/A
Optional Media Recovery Trough

Sure-Flo® Grit Valve

Sure-Flo® Grit Valve

 N/A
Sure Flo Grit Valve

Plan View

Plan View

 N/A
Plan View

Media Recovery Hopper

N/A

  • 11-gauge, welded-steel construction
  • Anti-clogging refuse screen
  • 30" wide x 30" deep x 12" high

Media Conveying Duct

N/A

  • 4" ID x 25' long-Heavy-duty construction

Media Reclaimer

N/A

  • Rugged, 12-gauge, welded-steel construction
  • Ultrawear lining with externally replaceable wearplate
  • Tunable to various media sizes
  • 800 CFM ventilation

Media Storage Hopper

N/A

  • 11-gauge, welded-steel construction
  • Viewing window
  • Capacity: 6.5 ft3 with PRS-6 models
  • Nominal diameter: 24" on PRS-6 models

Dust Collector/DCM-200 HV (High Vacuum)

N/A

  • 14-gauge, welded-steel, reinforced construction
  • 200 ft2 filtration with 30 cotton-sateen bags
  • Large access door; raised clean-out door
  • Push-button, pneumatic cleaning

Pressure Blower

N/A

  • 10 hp, 3450 RPM, 800 CFM (at 42" static pressure H2O)
  • 440 - 480 V, 60 Hz, fused disconnect

Chassis

N/A

  • Heavy-channel iron, welded and reinforced
  • Access ladder with hand holds
  • Cut-outs for forklift transport
  • Heavy-duty rubber casters on "D" and "SD" models

Warranty

N/A BEST WARRANTY IN THE INDUSTRY
Three years limited on parts and labor.

OTHER EMPIRE PRODUCTS

  • Blast Rooms
  • Portable Blasters
  • Automated Blast Systems
  • Blast Cabinets - economy to custom
Silica sand is not to be used in any Empire blast equipment.

Information subject to change without notice.

Safety

N/A We support our portable blasters and blast rooms with a complete line of modern safety equipment that protects operators and complies with OSHA when properly applied and maintained. All devices affecting breathing-air quality should be inspected and serviced regularly, particularly when a multi-purpose compressor is used to supply breathing air.