Request Information
2 Cu Ft Contractor Blast Machine
Unit of Measure

Specifications

Color

 N/A Champagne

Packaging

 N/A Secured on skid and shrink wrapped

Pressure

 N/A 150 psi

Part

 N/A Contractor Blast Machine

Height (Floor to Highest Point)

 N/A 44 in

Height (Floor to Highest Point)-Including Skid

 N/A 49 in

Width (Outside Hub to Hub)

 N/A 28 3/4 in

Width (Outside Hub to Hub)-Including Skid

 N/A 35 in

Length (Hose Coupling to Handle)

 N/A 39 in

Length (Hose Coupling to Handle)-Including Skid

 N/A 40 in

Machine Diameter

 N/A 16 in

Net Weight

 N/A 258 lbs

Shipping Volume

 N/A 39.7 ft³

Shipping Weight

 N/A 326 lbs

Floor To Center of Inlet Pipe

 N/A 24 3/8 in

Floor To Center of Hose Coupling

 N/A 3 1/4 in

Outside Handles Width

 N/A 19 1/4 in

Details

N/A

    Purpose:
    High- performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces . Produces a uniform surface texture , and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

    Requirements for Operation:
    These items are required but not included with this equipment.

    • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle . See Air Consumption Chart in Blast Off 2 booklet.
    • Maximum working pressure 150 psi
    • Minimum pressure 30 psi needed to operate OSHA- required remote control valves
    • NIOSH-approved supplied-air respirator
    • Grade D breathing- air supply as defined by the Compressed Gas Association Commodity Specification: 6-7.1
    • Abrasive blast media - consult abrasive supplier for appropriate media for your application
    • Blast suit and work boots
    Description of Operation:
    The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting, releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

    Note:
    For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment.

Advantages

N/A

  • Rated for 1 50-psi maximum working pressure
  • 1 1/2-inch Millennium valve provides unrestricted air flow
  • Quantum metering valve maintains smooth , consistent flow, adjustment knob allows precise control of media flow
  • 29-inch width fits through standard doorways
  • Two-wheel integral cart for ease of moving
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls
  • Weather-resistant storage area holds manuals, paperwork and small parts

Approvals and Certifications

N/A Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) code for 150-psi working pressure . Vessel is hydrostatically tested and National Board certified.
Remote control system complies with OSHA regulation 1910.244 (b).